BikepackingAccessories

by avantum.

Avantum Brands imports Old Man Mountain racks to the EU since 2005. We ship all over Europe.

Atlas Rack Pack by Old Man Mountain

The Atlas Rack Pack is a sleek and secure replacement for a seat pack. It sits lower on the bike, improving your center of gravity. Allows your dropper post to move unencumbered, and is locked in and stable on top of the rack of your choice. With four simple straps it installs with ease.

The Atlas Rack Pack is made from TPU fabric with Hypalon reinforcements, fully welded seams, and it has a roll top enclosure. The attachments straps secure the bag to the upper platform of the rack at four points to stop it from moving around.

Like all Old Man Mountain products the Atlas Rack Pack is secure, silent, and ready for any riding condition.

Atlas Rack Pack by Old Man Mountain bag for rack deck

For Divide or Elkhorn

Perfect Fit

The Atlas Rack Pack has perfect fitment on both racks.

Lightweight

At only 275 g it is a light bag with a full 9 liter capacity.

What Makes The Atlas Rack Pack so Special?

100% Waterproof

Made from TPU fabric with Hypalon reinforcements, fully welded seams, and a roll top enclosure. You can be fully confident that your gear will remain dry and protected, even if you don’t quite make that stream crossing.

Quick Stash Straps

A criss crossing bungee cord on top of the bag is ideal for a rain jacket or warm layer you want quick access to or that bag of salty chips you picked up at the last resupply.

Dropper Seatpost Compatible

Moving your gear from a seat bag to our Deck Pack gives you full use of your dropper again. The front end of the bag is tapered to help with seat clearance, even on small frames.

9 Liter Capacity

Not all trip segments have resupply options. When you need room for some extra food and water the Atlas Rack Pack’s 9L capacity will be ready. The 9L capacity is measured while still rolling the closure three times.

No Floppy Bags Here!

The attachments straps secure the bag to the deck of the rack at four points to stop it from jostling around. The quick locking buckles make it simple and easy to install and remove.

Silence is Precious

We head out into wilderness to escape noise. We made sure that all contact points between the Atlas Rack Pack and rack are silent, secure, and strong. No more rattling, and clanging bags.

Atlas Rack Pack

Specifications Atlas Rack Pack bag for rack deck:

Order Old Man Mountain

The bottom is reinforced with durable Hypalon, while the top is lightweight ripstop to keep things flexible and weight-conscious.
- 9 Liter capacity
- Fully welded and waterproof construction
- Hypalon reinforcements at all attachment points are more abrasion resistant and provide extra grip where needed.
- Perfect fitment on all OMM rack decks.
- PFAS/PFC free materials
- Roll top enclosure is easy and reliable
- Lightweight = 275g

Examples

Examples of Atlas Rack Pack when mounted on a bike.

Atlas Rack Pack

BUY NOW

WANT TO ORDER BIKEPACKING GEAR?

We deliver to most EU countries in 3-8 days.

We ship all over Europe.
Select your language:

Bikepacking Accessories

Client Images

Impala on a Canyon (Germany).

Hemlock bags on a Bombtrack (Spain).

Divide on a Salsa Blackborow (Switzerland).

Divide on a gravel bike (Austria).

Divide+Elkhorn on a Bergamont RD7 (France).

Divide on a Pole Voima (Portugal).

Divide x2 on a Spitzing Evolution (Germany).

Why Old Man Mountain is the best option on the planet

No eyelets?

If your bike frame has no eyelets for mounting of a traditional rack, then your options are suddenly reduced drastically. A seatpost mounted carrier might be a quick fix, but you will be very limited to 8-9 kgs of weight.
Old Man Mountain was born for this back in 1996. The new Divide will fit any bike that does not have eyelets. And in today's world that would be close to 100% of MTB Bikes.

Extremely Compatible

Old Man Mountain will fit almost any bike out there. No matter the wheel size or the axle configuration. There is only 1 Divide, but with so many mounting hardware options, we can fit almost any bike.

Around the World

Whether on an everyday ride in your community or on a life-changing world tour that lasts for months, the Old Man Mountain racks have been tried and tested by users around the world on all kinds of roadtrips and in all kinds of wheather.

Warranty

Old Man Mountain warrants each product it manufactures to be free from defect in material and workmanship for the purpose it was intended to the original purchaser for the reasonable lifetime of the product.

Efficiency

Consider this; if you had a Divide in the rear and a Divide on the front you would be able to carry 64 kgs of gear, while having less than 2kgs of racks. Now that's efficient!

Proprietary Tooling

Each component of a rack (tubes, side-bars, dropouts, top plate) must be held by a jig to allow the welder a solid foundation to weld on and to ensure dimensional precision. Our welding jigs are painstakingly crafted to the exact specifications of each model. This ensures proper alignment and makes our production highly efficient.

Dynamic Load Ratings

You don't ride only straight ahead on a flat surface, so why should your rack be rated only in these conditions? All of our racks are rated for a "dynamic" load. Simply put, we test our racks in actual, real-life conditions. Our load ratings take into account, all forces; up, down, and side-to-side...much like the forces you would encounter during your own trip.

Customer Support

Today, there are many different rear axles on bikes which often makes it hard to know which of our racks is compatible with your bike. And then there are rear suspensions, v-brakes, disc brakes, fat bikes, and a lot of other inventions. We try to stay ahead, so just get in touch with us before you order and together we will figure out the best configuration for your bike.

Versatility

Whether its a SoftRide Beam-equipped Co-Motion Tandem, a fat bike, or a full-suspension GT I-Drive, our brake boss and axle-mounting designs offer new solutions to old problems. Our dealers and customers are always telling us about new and exciting ways our racks solve their gear carrying problems. Our racks can also fit disc-brake equipped bikes, 29" mountain bikes, thru-axle designs and fat bikes.

Materials & Construction

Other rack manufacturers have soiled the perception of aluminum by worrying more about profits than reliability. The result is shoddy welding and the use of sub-par grades of material. The right alloy combined with proper construction makes Aluminum a truly amazing material. It's used by airline manufacturers and land speed race cars to provide ultimate combination of rigidity and light weight. Our rack material is a bomber grade of Aircraft-grade, 6061-T6, tubular aluminum.

More importantly than the material is the quality of the welds. Our welds are second to none and each joint is welded on both sides, resulting in joints that are far superior to other aluminum racks. The light weight of aluminum also allows us to use a much larger wall thickness than tubular steel racks.

Front Suspension Compatible Design

Other front suspension compatible designs hang the weight of the pannier and gear over the crown of the fork (we actually prototyped this design but scrapped it in favor of our current design). This design causes all this extra weight (think of it as adding 14+ kgs of body weight) to compress the suspension over each bump, causing premature wear on the fork and means you'd have to adjust the fork every time you pack up.

Our front suspension design, attaches the weight of all your gear to the wheel which means you don't have to mess with fork adjustment each time you load your gear. We also have a much stiffer design in that our models provide bracing at the bottom of the rack. Our suspension-compatible front racks mount to the axle with our QR Skewer or thru-axle, providing a solid attachment which excellent lateral rigidity.

Shipping

Promotion on shipping from only 6.99 Eur

More Images

- The latest pictures, racks & bags
- Divide pictures
- Elkhorn pictures
- By users
- OMM on fat bikes
- OMM on ebikes
- Of Sergio & Amelia

Atlas Rack Pack by Old Man Mountain